View REF3012-15_9104747.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ref3012 ref3020 ref3025 ref3030 ref3033 ref3040 sbvs032f ?march 2002 ?revised august 2008 description the ref30xx is a precision, low power, low voltage dropout voltage reference family available in a tiny sot23-3. the ref30xx small size and low power consumption (50 a max) make it ideal for portable and battery-powered applica- tions. the ref30xx does not require a load capacitor. unloaded, the ref30xx can be operated with supplies within 1mv of output voltage. all models are specified for the wide temperature range, ?0 c to +125 c. features micro size package: sot23-3 low dropout: 1mv high output current: 25ma high accuracy: 0.2% low i q : 50 a max excellent specified drift performance: 50ppm/ c (max) from 0 c to +70 c 75ppm/ c (max) from C40 c to +125 c copyright ?2002-2008, texas instruments incorporated 50ppm/ c max, 50 a in sot23-3 cmos voltage reference please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. applications portable, battery-powered equipment data acquisition systems medical equipment hand-held test equipment product voltage (v) ref3012 1.25 ref3020 2.048 ref3025 2.5 ref3030 3.0 ref3033 3.3 ref3040 4.096 1 in 2 out 3 gnd ref3012 ref3020 ref3025 ref3030 ref3033 ref3040 sot23-3 dropout voltage vs load current 350 300 250 200 150 100 50 0 dropout voltage (mv) 0 5 10 15 20 25 30 load current (ma) production data information is current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. all trademarks are the property of their respective owners. www.ti.com www.ti.com
ref3012, 3020, 3025, 3030, 3033, 3040 2 sbvs032f www.ti.com absolute maximum ratings (1) supply voltage, v+ to v ................................................................... 7.0v output short-circuit (2) .............................................................. continuous operating temperature .................................................. 40 c to +125 c storage temperature ..................................................... 65 c to +150 c junction temperature .................................................................... +150 c lead temperature (soldering, 10s) ............................................... +300 c notes: (1) stresses above these ratings may cause permanent damage. exposure to absolute maximum conditions for extended periods may degrade device reliability. these are stress ratings only, and functional operation of the device at these, or any other conditions beyond those specified, is not implied. (2) short circuit to ground. specified package temperature package ordering transport product package-lead designator range marking number media, quantity ref3012 so t23-3 dbz 40 c to +125 c r30a ref3012aidbzt tape and reel, 250 " """" ref3012aidbzr tape and reel, 3000 ref3020 sot23-3 dbz 40 c to +125 c r30b ref3020aidbzt tape and reel, 250 " """" ref3020aidbzr tape and reel, 3000 ref3025 sot23-3 dbz 40 c to +125 c r30c ref3025aidbzt tape and reel, 250 " """" ref3025aidbzr tape and reel, 3000 ref3030 sot23-3 dbz 40 c to +125 c r30f ref3030aidbzrt tape and reel, 250 " """" ref3030aidbzr tape and reel, 3000 ref3033 sot23-3 dbz 40 c to +125 c r30d ref3033aidbzt tape and reel, 250 " """" ref3033aidbzr tape and reel, 3000 ref3040 sot23-3 dbz 40 c to +125 c r30e ref3040aidbzt tape and reel, 250 " """" ref3040aidbzr tape and reel, 3000 note: (1) for the most current package and ordering information, see the package option addendum at the end of this document, o r see the ti website at www.ti.com. package/ordering information (1) electrical characteristics boldface limits apply over the specified temperature range, t a = C 40 c to +125 c. at t a = +25 c, i load = 0ma, v in = 5v, unless otherwise noted. ref30xx parameter conditions min typ max units ref3012 (1) - 1.25v output voltage v out 1.2475 1.25 1.2525 v initial accuracy 0.2 % noise output voltage noise f = 0.1hz to 10hz 14 vp-p voltage noise f = 10hz to 10khz 42 vrms line regulation 1.8v v in 5.5v 60 190 v/v ref3020 C 2.048 output voltage v out 2.044 2.048 2.052 v initial accuracy 0.2 % noise output voltage noise f = 0.1hz to 10hz 23 vp-p voltage noise f = 10hz to 10khz 65 vrms line regulation v ref + 50mv v in 5.5v 110 290 v/v ref3025 C 2.5v output voltage v out 2.495 2.50 2.505 v initial accuracy 0.2 % noise output voltage noise f = 0.1hz to 10hz 28 vp-p voltage noise f = 10hz to 10khz 80 vrms line regulation v ref + 50mv v in 5.5v 120 325 v/v electrostatic discharge sensitivity this integrated circuit can be damaged by esd. texas instru- ments recommends that all integrated circuits be handled with appropriate precautions. failure to observe proper handling and installation procedures can cause damage. esd damage can range from subtle performance degradation to complete device failure. precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ref3012, 3020, 3025, 3030, 3033, 3040 3 sbvs032f www.ti.com electrical characteristics boldface limits apply over the specified temperature range, t a = C 40 c to +125 c. at t a = +25 c, i load = 0ma, v in = 5v, unless otherwise noted. ref30xx parameter conditions min typ max units ref3030 C 3.0v output voltage v out 2.994 3.0 3.006 v initial accuracy 0.2 % noise output voltage noise f = 0.1hz to 10hz 33 vp-p voltage noise f = 10hz to 10khz 94 vrms line regulation v ref + 50mv v in 5.5v 120 375 v/v ref3033 C 3.3v output voltage v out 3.294 3.30 3.306 v initial accuracy 0.2 % noise output voltage noise f = 0.1hz to 10hz 36 vp-p voltage noise f = 10hz to 10khz 105 vrms line regulation v ref + 50mv v in 5.5v 130 400 v/v ref3040 C 4.096v output voltage v out 4.088 4.096 4.104 v initial accuracy 0.2 % noise output voltage noise f = 0.1hz to 10hz 45 vp-p voltage noise f = 10hz to 10khz 128 vrms line regulation v ref + 50mv v in 5.5v 160 410 v/v ref3012, ref3020, ref3025, ref3030, ref3033, ref3040 output voltage temp drift (2) dv out /dt 0 c t a +70 c 20 50 ppm/ c C 30 c t a +85 c 28 60 ppm/ c C 40 c t a +85 c 30 65 ppm/ c C 40 c t a +125 c 35 75 ppm/ c long-term stability 0-1000h 24 ppm 1000-2000h 15 ppm load regulation (3) dv out /di load 0ma < i load < 25ma, 3 100 v/ma v in = v ref + 500mv (1) thermal hysteresis (4) dt 25 100 ppm dropout voltage v in v out 150 mv short-circuit current i sc 45 ma turn on settling time to 0.1% at v in = 5v with c l = 0 120 s power supply voltage v s i l = 0 v ref + 0.001 (5) 5.5 v over temperature C 40 c t a +125 cv ref + 0.05 5.5 v quiescent current i q 42 50 a over temperature C 40 c t a +125 c59 a temperature range specified range 40 +125 c operating range 40 +125 c storage range 65 +150 c thermal resistance sot23-3 surface-mount jc 110 c/w ja 336 c/w notes: (1) minimum supply voltage for ref3012 is 1.8v. (2) box method used to determine over temperature drift. (3) typical value of load regulation reflects measurements using a force and sense contacts, see text load regulation . (4) thermal hysteresis procedure is explained in more detail in applications information section of data sheet. (5) for i l > 0, see typical characteristic curves.
ref3012, 3020, 3025, 3030, 3033, 3040 4 sbvs032f www.ti.com typical characteristics at t a = +25 c, v in = +5v power supply, ref3025 is used for typical characteristics, unless otherwise noted. quiescent current vs temperature 60 50 40 30 20 10 0 i q ( a) temperature ( c) 40 20 0 20 60 40 80 100 120 140 temperature drift (0 c to +70 c) 50 45 40 35 30 25 20 15 10 5 0 number of units 51015202530 40 35 45 50 55 65 60 drift (ppm/ c) temperature drift ( 40 c to +125 c) 100 90 80 70 60 50 40 30 20 10 0 number of units 51015202530 40 35 45 50 55 65 60 drift (ppm/ c) load regulation vs temperature 6 5 4 3 2 1 0 load regulation ( v/ma) temperature ( c) 40 20 0 20 60 40 80 100 120 140 output voltage vs temperature 2.502 2.500 2.498 2.496 2.494 2.492 2.490 output voltage (v) 40 20 0 20 60 40 80 100 120 140 temperature ( c) maximum load current vs temperature 35 30 25 20 15 10 5 maximum load current (ma) 40 20 0 20 60 40 80 100 120 140 temperature ( c)
ref3012, 3020, 3025, 3030, 3033, 3040 5 sbvs032f www.ti.com typical characteristics (cont.) at t a = +25 c, v in = +5v power supply, ref3025 is used for typical characteristics, unless otherwise noted. output impedance vs frequency 100 10 1 0.1 0.01 output impedance (db) 1 10 100 1k 10k 100k frequency (hz) power-supply rejection ratio vs frequency 90 80 70 60 50 40 30 20 10 0 psrr (db) 1 10 100 1k 10k 100k frequency (hz) output voltage vs supply voltage (i load = 25ma) 2.500200 2.500100 2.500000 2.499900 2.499800 2.499700 2.499600 2.499500 2.499400 2.499300 output voltage (v) 2.5 3 3.5 4 4.5 5 5.5 6 supply (v) output voltage vs load current 2.500010 2.500000 2.499990 2.499980 2.499970 2.499960 2.499950 2.499940 2.499930 output voltage (v) 0 5 10 15 20 25 30 load current (ma) line regulation vs temperature 200 150 100 50 0 50 line regulation ( v/v) temperature ( c) 40 20 0 20 60 40 80 100 120 140 output voltage vs supply voltage (no load) 2.500010 2.500000 2.499990 2.499980 2.499970 2.499960 2.499950 2.499940 2.499930 2.499920 output voltage (v) 2.5 3 3.5 4 4.5 5 5.5 6 supply (v)
ref3012, 3020, 3025, 3030, 3033, 3040 6 sbvs032f www.ti.com typical characteristics (cont.) at t a = +25 c, v in = +5v power supply, ref3025 is used for typical characteristics, unless otherwise noted. line transient response 10 s/div 500mv/div 50mv/div v in v out step response, c l = 0, 3v startup 40 s/div v in v out 3v/div 1v/div step response, c l = 0, 5v startup 10 s/div v in 5v/div 1v/div v out 0-1ma load transient (c l = 0) 10 s/div 20mv/div i l = 1ma v out i l = 0ma 0-5ma load transient (c l = 0) 10 s/div 20mv/div i l = 5ma v out i l = 0ma 1-6ma load transient (c l =1 f) 40 s/div 20mv/div v out i l = 0ma i l = 6ma
ref3012, 3020, 3025, 3030, 3033, 3040 7 sbvs032f www.ti.com typical characteristics (cont.) at t a = +25 c, v in = +5v power supply, ref3025 is used for typical characteristics, unless otherwise noted. 0.1hz to 10hz noise 10 v/div 1.0s/div long-term stability 0 to 1000 hours 80 70 60 50 40 30 20 10 0 absolute output voltage drift (ppm) 0 100 200 300 400 500 600 700 800 900 1000 time (hours) long-term stability 1000 to 2000 hours absolute output voltage drift (ppm) 1200 1300 1600 1800 1900 2000 time (hours) 80 70 60 50 40 30 20 10 0 1000 1100 1400 1500 1700 long-term stability 0 to 2000 hours absolute output voltage drift (ppm) 0 200 400 600 800 1000 1200 1400 1600 1800 2000 time (hours) 80 70 60 50 40 30 20 10 0 1-25ma load transient (c l = 1 f) 100 s/div 20mv/div v out i l = 1ma i l = 25ma
ref3012, 3020, 3025, 3030, 3033, 3040 8 sbvs032f www.ti.com theory of operation the ref30xx is a series, cmos, precision bandgap voltage reference. its basic topology is shown in figure 1. the transistors q 1 and q 2 are biased such that the current density of q 1 is greater than that of q 2 . the difference of the two base-emitter voltages, vbe 1 vbe 2 , has a positive temperature coefficient and is forced across resistor r 1 . this voltage is gained up and added to the base-emitter voltage of q 2 , which has a negative coefficient. the resulting output voltage is virtually independent of temperature. the curvature of the bandgap voltage, as seen in the typical curve, output voltage vs temperature, is due to the slightly nonlinear temperature coefficient of the base-emitter voltage of q 2 . the ref30xx features a low quiescent current, which is extremely stable over changes in both temperature and supply. the typical room temperature quiescent current is 42 a, and the maximum quiescent current over temperature is just 59 a. additionally, the quiescent current typically changes less than 2.5 a over the entire supply range, as shown in figure 3. supply voltages below the specified levels can cause the ref30xx to momentarily draw currents greater than the typical quiescent current. using a power supply with a fast rising edge and low output impedance easily prevents this. 1 3 ref30xx 2 0.47 f v in v out figure 1. simplified schematic of bandgap reference. figure 2. typical connections for operating ref30xx. supply current vs input voltage 42.5 42.0 41.5 41.0 40.5 40.0 i q ( a) 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 v in (v) figure 3. supply current vs supply voltage. r 1 q 2 q 1 + vbe 1 + vbe 2 application information for normal operation, the ref30xx does not require a capacitor on the output. if a capacitive load is connected, special care must be taken with the combination of low equivalent series resistance (esr) capacitors and high capacitance. this caution is especially true for low-output voltage devices; therefore, the ref3012 should only have a low-esr capacitance of 10 f or less. figure 2 shows the typical connections required for operation of the ref30xx. a supply bypass capacitor of 0.47 f is always recommended. supply voltage the ref30xx family of references features an extremely low dropout voltage. with the exception of the ref3012, which has a minimum supply requirement of 1.8v, the ref30xx can be operated with a supply of only 1mv above the output voltage in an unloaded condition. for loaded conditions, a typical dropout voltage versus load is shown on the cover page. thermal hysteresis thermal hysteresis for the ref30xx is defined as the change in output voltage after operating the device at 25 c, cycling the device through the specified temperature range, and returning to 25 c, and can be expressed as: v abs v v v ppm hyst pre post nom = ? ? ? ? ? ? ? ( ) 10 6 where: v hyst = calculated hysteresis v pre = output voltage measured at 25 c pre- temperature cycling v post = output voltage measured when device has been operated at 25 c, cycled through specified range 40 c to +125 c and returned to operation at 25 c. temperature drift the ref30xx is designed to exhibit minimal drift error, defined as the change in output voltage over varying temperature. using the box method of drift measurement, the ref30xx features a typical drift coefficient of 20ppm from 0 c to 70 c the primary temperature range of use for many applications. for industrial temperature ranges of 40 c to 125 c, the ref30xx family drift increases to a typical value of 50ppm.
ref3012, 3020, 3025, 3030, 3033, 3040 9 sbvs032f www.ti.com noise performance the ref30xx generates noise less than 50 vp-p between frequencies of 0.1hz to 10hz, and can be seen in the typical characteristic curve 0.1 to 10hz voltage noise. the noise voltage of the ref30xx increases with output voltage and operating temperature. additional filtering may be used to improve output noise levels, although care should be taken to ensure the output impedance does not degrade ac performance. long term stability long term stability refers to the change of the output voltage of a reference over a period of months or years. this effect lessens as time progresses as is apparent by the long term stability curves. the typical drift value for the ref30xx is 24ppm from 0-1000 hours, and 15ppm from 1000-2000 hours. this parameter is characterized by measuring 30 units at regular intervals for a period of 2000 hours. load regulation load regulation is defined as the change in output voltage due to changes in load current. load regulation for the ref30xx is measured using force and sense contacts as pictured in figure 4. the force and sense lines tied to the contact area of the output pin reduce the impact of contact and trace resistance, resulting in accurate measurement of the load regulation contributed solely by the ref30xx. for applications requiring improved load regulation, force and sense lines should be used. output pin meter v out + sense line force line load i l contact and trace resistance figure 4. accurate load regulation of ref30xx. application circuits negative reference voltage for applications requiring a negative and positive reference voltage, the opa703 and ref30xx can be used to provide a dual supply reference from a 5v supply. figure 5 shows the ref3025 used to provide a 2.5v supply reference voltage. the low offset voltage and low drift of the opa703 complement the low drift performance of the ref30xx to provide an accurate solution for split-supply applications. opa703 ref3025 +5v 5v +5v 10k ? 10k ? +2.5v 2.5v figure 5. ref3025 combined with opa703 to create positive and negative reference voltages. data acquisition often data acquisition systems require stable voltage references to maintain necessary accuracy. the ref30xx family features stability and a wide range of voltages suitable for most micro-controllers and data converters. figure 6 and figure 7 show two basic data acquisition systems.
ref3012, 3020, 3025, 3030, 3033, 3040 10 sbvs032f www.ti.com figure 6. basic data acquisition system 1. figure 7. basic data acquisition system 2. ads7822 v cc cs d out dclock v ref +in in gnd + + 5 ? 1 f to 10 f 1 f to 10 f 3.3v 0.1 f v in v+ v s microcontroller ref3033 gnd ads8324 v cc cs d out dclock v ref +in in gnd + + 5 ? 1 f to 10 f 1 f to 10 f 0.1 f 0v to 1.25v microcontroller 2.5v supply ref3012 gnd v in v out 2.5v 1.25v v s
packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) ref3012aidbzr active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3012aidbzrg4 active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3012aidbzt active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3012aidbztg4 active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3020aidbzr active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3020aidbzrg4 active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3020aidbzt active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3020aidbztg4 active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3025aidbzr active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3025aidbzrg4 active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3025aidbzt active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3025aidbztg4 active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3030aidbzr active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3030aidbzrg4 active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3030aidbzt active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3030aidbztg4 active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3033aidbzr active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3033aidbzrg4 active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3033aidbzt active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3033aidbztg4 active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3040aidbzr active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3040aidbzrg4 active sot-23 dbz 3 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3040aidbzt active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ref3040aidbztg4 active sot-23 dbz 3 250 green (rohs & no sb/br) cu nipdau level-1-260c-unlim (1) the marketing status values are defined as follows: package option addendum www.ti.com 8-jun-2009 addendum-page 1
active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. -- the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis. package option addendum www.ti.com 8-jun-2009 addendum-page 2
tape and reel information *all dimensions are nominal device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant ref3012aidbzr sot-23 dbz 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3012aidbzt sot-23 dbz 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3020aidbzr sot-23 dbz 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3020aidbzt sot-23 dbz 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3025aidbzr sot-23 dbz 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3025aidbzt sot-23 dbz 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3030aidbzr sot-23 dbz 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3030aidbzt sot-23 dbz 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3033aidbzr sot-23 dbz 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3033aidbzt sot-23 dbz 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3040aidbzr sot-23 dbz 3 3000 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 ref3040aidbzt sot-23 dbz 3 250 179.0 8.4 3.15 2.95 1.22 4.0 8.0 q3 package materials information www.ti.com 20-jul-2010 pack materials-page 1
*all dimensions are nominal device package type package drawing pins spq length (mm) width (mm) height (mm) ref3012aidbzr sot-23 dbz 3 3000 203.0 203.0 35.0 ref3012aidbzt sot-23 dbz 3 250 203.0 203.0 35.0 ref3020aidbzr sot-23 dbz 3 3000 203.0 203.0 35.0 ref3020aidbzt sot-23 dbz 3 250 203.0 203.0 35.0 ref3025aidbzr sot-23 dbz 3 3000 203.0 203.0 35.0 ref3025aidbzt sot-23 dbz 3 250 203.0 203.0 35.0 ref3030aidbzr sot-23 dbz 3 3000 203.0 203.0 35.0 ref3030aidbzt sot-23 dbz 3 250 203.0 203.0 35.0 ref3033aidbzr sot-23 dbz 3 3000 203.0 203.0 35.0 ref3033aidbzt sot-23 dbz 3 250 203.0 203.0 35.0 ref3040aidbzr sot-23 dbz 3 3000 203.0 203.0 35.0 ref3040aidbzt sot-23 dbz 3 250 203.0 203.0 35.0 package materials information www.ti.com 20-jul-2010 pack materials-page 2

important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ti ? s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ti ? s standard warranty. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ti assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ti components. to minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any ti patent right, copyright, mask work right, or other ti intellectual property right relating to any combination, machine, or process in which ti products or services are used. information published by ti regarding third-party products or services does not constitute a license from ti to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of ti information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ti is not responsible or liable for such altered documentation. information of third parties may be subject to additional restrictions. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. ti products are not authorized for use in safety-critical applications (such as life support) where a failure of the ti product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of ti products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by ti. further, buyers must fully indemnify ti and its representatives against any damages arising out of the use of ti products in such safety-critical applications. ti products are neither designed nor intended for use in military/aerospace applications or environments unless the ti products are specifically designated by ti as military-grade or " enhanced plastic. " only products designated by ti as military-grade meet military specifications. buyers acknowledge and agree that any such use of ti products which ti has not designated as military-grade is solely at the buyer ' s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. ti products are neither designed nor intended for use in automotive applications or environments unless the specific ti products are designated by ti as compliant with iso/ts 16949 requirements. buyers acknowledge and agree that, if they use any non-designated products in automotive applications, ti will not be responsible for any failure to meet such requirements. following are urls where you can obtain information on other texas instruments products and application solutions: products applications audio www.ti.com/audio communications and telecom www.ti.com/communications amplifiers amplifier.ti.com computers and peripherals www.ti.com/computers data converters dataconverter.ti.com consumer electronics www.ti.com/consumer-apps dlp ? products www.dlp.com energy and lighting www.ti.com/energy dsp dsp.ti.com industrial www.ti.com/industrial clocks and timers www.ti.com/clocks medical www.ti.com/medical interface interface.ti.com security www.ti.com/security logic logic.ti.com space, avionics and defense www.ti.com/space-avionics-defense power mgmt power.ti.com transportation and www.ti.com/automotive automotive microcontrollers microcontroller.ti.com video and imaging www.ti.com/video rfid www.ti-rfid.com wireless www.ti.com/wireless-apps rf/if and zigbee ? solutions www.ti.com/lprf ti e2e community home page e2e.ti.com mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2011, texas instruments incorporated

▲Up To Search▲

Price & Availability of REF3012-15

	To Download REF3012-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .